Fabrication Withdrawals

"Andy Sheehan, StreetsideStig" (AndySheehan-StreetsideStig) 03/31/2017 at 15:29 • Filed to: None

6

12

So I discovered !!!error: Indecipherable SUB-paragraph formatting!!! late last year and have seen every episode. It’s educational, hilarious, and amazing. And now I’m waiting for the next episode.

Have you Opponauts found any other swap/build series on Youtube that go into this level of detail? I mean, Binky was just sitting there, for years, being enjoyed by countless gearheads while I fumbled around in crippling ignorance. What else am I missing?

(I have also seen and enjoyed every episode of Mighty Car Mods.)

bob and john > Andy Sheehan, StreetsideStig 03/31/2017 at 15:34

2

binky and MCM are really the only big ‘builds’

speed acedemy has a couple of okay builds, but so much of it is basicly them taking a selfie and going: so mark is here beside me doing something *30 second pan over the work* and then continued talking to the camera for like 5 minutes.

functionoverfashion > Andy Sheehan, StreetsideStig 03/31/2017 at 15:39

2

Right there with you except I’m so late to the Binky party that I still have episodes to watch... not for too long I’m sure. But my free time comes sparingly these days...

RamblinRover Luxury-Yacht > Andy Sheehan, StreetsideStig 03/31/2017 at 15:49

1

I recommend Lazze for just making sheet metal parts. I mean, it’s not a project channel as such, but if you want to see how a sheet metal wizard goes about making a fender for a Deuce, then...

https://www.youtube.com/channel/UCoFFG4DutpKz5ouqWdMbv1w

diplodicus > Andy Sheehan, StreetsideStig 03/31/2017 at 15:52

1

abom79 uploads frequently if you like machining.

https://www.youtube.com/user/Abom79

Twingo Tamer - About to descend into project car hell. > Andy Sheehan, StreetsideStig 03/31/2017 at 15:55

1

I havent found anything similar unfortunately. I just signed up to MTOD to get my car videos fix and help soothe the pain of wheeler dealers falling apart.

AddictedToM3s - Drives a GC > Andy Sheehan, StreetsideStig 03/31/2017 at 16:04

1

His parts choices a methods can be a little questionable at times but B is for Build is a good YouTube channel for something like this.

Not necessarily a build channel but Engineering Explained is a very informative and we’ll done channel.

Andy Sheehan, StreetsideStig > AddictedToM3s - Drives a GC 03/31/2017 at 16:10

1

Yes. This is what I’m looking for. Long videos I can eat lunch to. Thanks!

uofime-2 > Andy Sheehan, StreetsideStig 03/31/2017 at 16:13

1

AvE is rude, crude and lewd but also produces a ton of very entertaining content.

Tears a lot of stuff appart, tools mainly occasionaly instustrial machines, hair dryers and all manner of other stuff, looks at how its make and how it works. Does some electronics projects and back yard machining. I have no idea how he produces so much content.

AddictedToM3s - Drives a GC > Andy Sheehan, StreetsideStig 03/31/2017 at 16:14

1

Since you’re looking for long videos you might like Salomondrin as well. He’s a pretty down to earth guy with a pretty expensive car collection. He drives them and does vlogs just messing around with his friends. Also a lot of self-depreciating humor which is quite Ra for someone of his financial status. Funny guy who just loves cars and just wants to play with cars I saw him at car week with his 918 as well. Pretty cool guy.

Ike > Andy Sheehan, StreetsideStig 03/31/2017 at 16:14

4

There’s two guys here that do good work

Urambo Tauro > Andy Sheehan, StreetsideStig 03/31/2017 at 17:24

1

EricTheCarGuy has come a long way on his #FairmontProject build. Not quite as much raw fabrication stuff at Project Binky, but it’s still pretty sweet!

Andy Sheehan, StreetsideStig > Urambo Tauro 04/03/2017 at 09:43

1

I shall check that out. ETCG has helped me with my busted old Hondas many times.